Chapter 24 Multicast

24.7 General MVR Configuration

Use the MVR screen to create multicast VLANs and select the receiver port(s) and a source port for each multicast VLAN. Click Advanced Applications > Multicast > Multicast Setting > MVR link to display the screen as shown next.

Note: You can create up to five multicast VLANs and up to 256 multicast rules on the Switch.

Note: Your Switch automatically creates a static VLAN (with the same VID) when you create a multicast VLAN in this screen.

Figure 104 Advanced Application > Multicast > Multicast Setting > MVR

The following table describes the related labels in this screen.

Table 66 Advanced Application > Multicast > Multicast Setting > MVR

LABEL

DESCRIPTION

Active

Select this check box to enable MVR to allow one single multicast VLAN

 

to be shared among different subscriber VLANs on the network.

 

 

Name

Enter a descriptive name (up to 32 printable ASCII characters) for

 

identification purposes.

 

 

Multicast VLAN

Enter the VLAN ID (1 to 4094) of the multicast VLAN.

ID

 

 

 

 

237

XGS-4526/4528F/4728F User’s Guide