Chapter 52 ARP Table
52.2 The ARP Table Screen
Click Management > ARP Table in the navigation panel to open the following screen. Use the ARP table to view
Figure 243 Management > ARP Table
The following table describes the labels in this screen.
Table 168 Management > ARP Table
LABEL | DESCRIPTION |
Condition | Specify how you want the Switch to remove ARP entries when you click |
| Flush. |
| Select All to remove all of the dynamic entries from the ARP table. |
| Select IP Address and enter an IP address to remove the dynamic entries |
| learned with the specified IP address. |
| Select Port and enter a port number to remove the dynamic entries |
| learned on the specified port. |
|
|
Flush | Click Flush to remove the ARP entries according to the condition you |
| specified. |
|
|
Cancel | Click Cancel to return the fields to the factory defaults. |
|
|
Index | This is the ARP table entry number. |
|
|
IP Address | This is the learned IP address of a device connected to a Switch port with |
| the corresponding MAC address below. |
|
|
MAC | This is the MAC address of the device with the corresponding IP address |
Address | above. |
|
|
VID | This field displays the VLAN to which the device belongs. |
|
|
Port | This field displays the port to which the device connects. CPU means this |
| learned IP address is the Switch’s management IP address. |
|
|
Type | This shows whether the MAC address is dynamic (learned by the Switch) or |
| static (manually entered in the Static MAC Forwarding screen). |
|
|
452 |
| |
| ||
|
|
|