Chapter 24 Multicast

Click Advanced Applications > Multicast > Multicast Setting > IGMP Filtering Profile link to display the screen as shown.

Figure 101 Advanced Application > Multicast > Multicast Setting > IGMP Filtering Profile

The following table describes the labels in this screen.

Table 65 Advanced Application > Multicast > Multicast Setting > IGMP Filtering Profile

LABEL

DESCRIPTION

Profile Name

Enter a descriptive name for the profile for identification purposes.

 

To configure additional rule(s) for a profile that you have already added,

 

enter the profile name and specify a different IP multicast address

 

range.

 

 

Start Address

Type the starting multicast IP address for a range of multicast IP

 

addresses that you want to belong to the IGMP filter profile.

 

 

End Address

Type the ending multicast IP address for a range of IP addresses that

 

you want to belong to the IGMP filter profile.

 

If you want to add a single multicast IP address, enter it in both the

 

Start Address and End Address fields.

 

 

Add

Click Add to save the profile to the Switch’s run-time memory. The

 

Switch loses these changes if it is turned off or loses power, so use the

 

Save link on the top navigation panel to save your changes to the non-

 

volatile memory when you are done configuring.

 

 

Clear

Click Clear to clear the fields to the factory defaults.

 

 

Profile Name

This field displays the descriptive name of the profile.

 

 

Start Address

This field displays the start of the multicast address range.

 

 

End Address

This field displays the end of the multicast address range.

 

 

234

 

XGS-4526/4528F/4728F User’s Guide