Intel 317698-001 manual

Page 2

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. Intel products are not intended for use in medical, life saving, life sustaining, critical control or safety systems, or in nuclear facility applications.

Intel may make changes to specifications and product descriptions at any time, without notice.

Intel Corporation may have patents or pending patent applications, trademarks, copyrights, or other intellectual property rights that relate to the presented subject matter. The furnishing of documents and other materials and information does not provide any license, express or implied, by estoppel or otherwise, to any such patents, trademarks, copyrights, or other intellectual property rights.

IMPORTANT - PLEASE READ BEFORE INSTALLING OR USING INTEL® PRE-RELEASE PRODUCTS.

Please review the terms at http://www.intel.com/netcomms/prerelease_terms.htm carefully before using any Intel® pre-release product, including any evaluation, development or reference hardware and/or software product (collectively, “Pre-Release Product”). By using the Pre-Release Product, you indicate your acceptance of these terms, which constitute the agreement (the “Agreement”) between you and Intel Corporation (“Intel”). In the event that you do not agree with any of these terms and conditions, do not use or install the Pre-Release Product and promptly return it unused to Intel.

Designers must not rely on the absence or characteristics of any features or instructions marked “reserved” or “undefined.” Intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them.

Intel processor numbers are not a measure of performance. Processor numbers differentiate features within each processor family, not across different processor families. See http://www.intel.com/products/processor_number for details.

This document contains information on products in the design phase of development. The information here is subject to change without notice. Do not finalize a design with this information.

The 82575 Gigabit Ethernet Controller may contain design defects or errors known as errata which may cause the product to deviate from published specifications. Current characterized errata are available on request.

Hyper-Threading Technology requires a computer system with an Intel® Pentium® 4 processor supporting HT Technology and a HT Technology enabled chipset, BIOS and operating system. Performance will vary depending on the specific hardware and software you use. See http://www.intel.com/ products/ht/Hyperthreading_more.htm for additional information.

Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.

Copies of documents which have an order number and are referenced in this document, or other Intel literature may be obtained by calling 1-800-548-4725 or by visiting Intel's website at http://www.intel.com.

Intel and Intel logo are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. *Other names and brands may be claimed as the property of others.

Copyright © 2005-2007, Intel Corporation. All Rights Reserved.

ii

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Intel 82575 Gigabit Ethernet Controller Design GuidePage Contents Design and Layout Checklists Revision History Date Revision DescriptionThis page intentionally left blank Introduction ScopeReference Documents Link Width Configuration Other PCI Express SignalsPhysical Layer Features PCI Express Port Connection to the DevicePolarity Inversion Lane ReversalPCI Express Routing Lane Reversal supported modesThis page left intentionally blank Clock Source Ethernet Component Design GuidelinesGeneral Design Considerations for Ethernet Controllers Magnetics for 1000 BASE-TThird-Party Magnetics Manufacturers Designing with the 82575/EB/ES Gigabit Ethernet ControllerModules for 1000 BASE-T Ethernet Manufacturer Part NumberPCI/LAN Function Index PCI Function # SelectSerial Eeprom Symbol Ball # Name and functionFunction Default Control options General RegionsManufacturer Size Manufacturers Part Number Eeprom Map InformationSPI EEPROMs for 82575 Ethernet Controller Controller Eeupdate FlashFlash Write Control Flash Erase ControlManufacturer Device SMBus and NC-SIFlash Device Information Power Supplies for the 82575 Ethernet Controller Controllers Example Switching Voltage Regulator for 1.0 V and 1.8 1 82575 Ethernet Controller Power Sequencing Vout=1.0v 2AY Power Rail 7uF or 1uF 10uF 2 82575 Ethernet Controller Device Power Supply FilteringUsing Regulators With Enable Pins Power Management PCIe Power Management4.2 82575 Ethernet Controller Power Management L0s D0u D0aPHY Functionality Auto Cross-over for MDI and MDI-X resolution82575 Ethernet Controller Device Test Capability Smartspeed Low-Power Link UpUsing SmartSpeed Flow Control25.6 Reg Link Energy DetectPolarity Correction Copper PHY Link Configuration Auto-Negotiation differences between PHY, SerDes and SgmiiCopper/Fiber Switch SerDes-Detect Mode PHY is activeDevice Disable Internal PHY-to-SerDes TransitionSoftware-Definable Pins SDPs Bios handling of Device DisableEthernet Controller Design Guide Quartz Crystal Frequency Control Device Design ConsiderationsFrequency Control Component Types Fixed Crystal OscillatorProgrammable Crystal Oscillators Ceramic ResonatorCrystal Selection Parameters Vibrational ModeTemperature Stability and Environmental Requirements Nominal FrequencyCalibration Mode Load CapacitanceDrive Level Shunt CapacitanceEquivalent Series Resistance AgingCircuit Board Temperature ChangesReference Crystal Selection This page is intentionally left blank Oscillator Support Oscillator SolutionSpecifications Symbol Parameter Units Min Typical Max VGG=0.6V Rpar =100MΩ Cpar =20pF Layout Considerations for 82575 Ethernet Controllers Guidelines for Component PlacementEthernet Component Layout Guidelines LAN Layout for Integrated Magnetics Crystals and Oscillators Crystal layout considerationsBoard Stack Up Recommendations CrystalDifferential Pair Trace Routing for 10/100/1000 Designs Trace RoutingTrace Length and Symmetry for 1000 BASE-T Designs Signal Trace Geometry for 1000 BASE-T DesignsSignal Termination and Coupling Routing 1.8 V to the Magnetics Center Tap Signal IsolationSignal Detect Impedance DiscontinuitiesPower and Ground Planes Traces for Decoupling CapacitorsThermal Design Considerations Physical Layer Conformance TestingTroubleshooting Common Physical Layout Issues Conformance Tests for 10/100/1000 Mbps DesignsEthernet Controller Design Guide Symbol Design and Layout ChecklistsReference Schematics Thermal Management

317698-001 specifications

The Intel 317698-001 is a prominent and highly regarded component in the realm of computer hardware. This product is part of Intel's extensive portfolio, designed primarily for enhancing computing performance, efficiency, and reliability. It is typically associated with server motherboards and is known for its robust architecture, making it ideal for enterprise-level applications.

One of the standout features of the Intel 317698-001 is its compatibility with multiple Intel processors, which provides flexibility for users looking to upgrade or configure their systems. This compatibility ensures that enterprises can choose from a range of processors according to their specific workload requirements, allowing for tailored performance enhancements.

The product is built on the foundation of advanced technologies, such as Intel's Turbo Boost and Hyper-Threading. Turbo Boost allows the processor to operate at higher frequencies than its base clock speed when demand increases, providing a significant performance boost when needed. Hyper-Threading enables multiple threads to run simultaneously on each core, which can lead to improved multitasking capabilities and more efficient resource utilization.

Memory bandwidth is another vital characteristic of the Intel 317698-001. This component supports high-speed DDR4 memory, offering increased bandwidth that is crucial for data-intensive applications. The architecture is designed to work seamlessly with ECC (Error-Correcting Code) memory, enhancing system reliability by detecting and correcting internal data corruption.

In terms of connectivity, the Intel 317698-001 features multiple PCIe lanes, supporting various expansion cards for enhanced functionality. This includes the integration of NVMe drives for faster storage solutions, which is essential for modern applications that demand quick data access and retrieval.

Security is also a priority with the Intel 317698-001, which incorporates hardware-based security features to protect data integrity and prevent unauthorized access. These features include Intel Trusted Execution Technology, which creates a secure environment for executing sensitive code.

Overall, the Intel 317698-001 stands out with its combination of performance, versatility, and security. It is an ideal choice for businesses looking to enhance their computing capabilities while ensuring system reliability and security in an increasingly data-driven world. With its robust technological foundation, it continues to play a critical role in modern computing environments.
Top Page Image Contents