Adjustments
Adjusting the Picture Size
2 Press the ¨ >/.buttons.
>. . . to rotate clockwise
.. . . to rotate counter clockwise
The adjustment data becomes the individual setting for each input signal received.
1 Press the SIZE button. The “SIZE” OSD appears.
SIZE |
|
| SIZE |
32 | 68 |
2 For vertical adjustment Press the ¨ >/.buttons.
To erase the “GEOMETRY” OSD, press the GEOM button again.
The “GEOMETRY” OSD automatically disappears 10 seconds after you release the buttons.
To reset, press the RESET button while the OSD is on.
>. . . to enlarge
.. . . to diminish
For horizontal adjustment
Press the > ?//buttons.
?. . . to diminish /. . . to enlarge
To erase the “SIZE” OSD, press the SIZE button again. The “SIZE” OSD automatically disappears 10 seconds after you release the buttons.
To reset, press the RESET button while the OSD is on.
Adjusting the Picture Rotation
Adjusting the Pincushion
The adjustment data becomes the individual setting for each input signal received.
1 Press the GEOM button.
The “GEOMETRY” OSD appears.
GEOM |
|
GEOMETRY | |
32 | 68 |
2 Press the > ?//buttons.
?. . . to diminish the picture sides
/. . . to expand the picture sides
The adjustment data becomes the common setting for all input signals.
1 Press the GEOM button.
The “GEOMETRY” OSD appears.
GEOM |
|
GEOMETRY | |
32 | 68 |
To erase the “GEOMETRY” OSD, press the GEOM button again.
The “GEOMETRY” OSD automatically disappears 10 seconds after you release the buttons.
To reset, press the RESET button while the OSD is on.
6