Panasonic IMC80A specifications External Regenerative Resistor, DIN Rail Mounting Unit

Optional Parts

External Regenerative Resistor

	Manufacturer’s		Specification		Remarks
Part No.		Ohmic Value	Rated Power	Operating Temperature for	(Specifications for
	model name
				Built-in Temperature Fuse	the driver voltage)
DV0P2890	45M03	50 Ω	10W	130±2˚C	For single-phase 100V
DV0P2891	45M03	100 Ω	10W	130±2˚C	For single-phase/
					three-phase 200V

Manufactured by: IWAKI MUSEN KENKYUSHO CO., LTD.

<Note>

For safety reasons, the external regenerative resistor has a built-in temperature fuse. The built-in temperature fuse may be disconnected depending on heat dissipation conditions, range of use temperatures, supply voltage, and load variations.

	4.3	57
60	52
		65
	10

300

4.3

Female terminal 5556PBTL

(or 5556PBT)

<Cautions>

The regenerative resistor may be hot.

Take preventive actions against a fire and burn.

Do not mount the regenerative resistor in the vicinity of an inflammable object or in a place where an operator may easily touch it by hand.

t0.6

DIN Rail Mounting Unit

(1)Part No. DV0P3811

(2)Outline Dimension

35

20

5

140 130.5

2-M4 bar ring

(for mounting screws)

(6)

Mounting plate

<Remarks>

•Two mounting screws (M4 x length 8, pan head machine screws) are supplied.

•* When extended, the rail stopper is 10mm long.

<Note>

For installation and removal, refer to “Installation” of Before Use edition on Pages 18 to 19.

* (7)

Rail stop

(6)

190