Toshiba Copier manual Answering Machine Backup, If Quiet Detect Time is not working properly

Page 33

Using the Unit with an Answering Machine

If Quiet Detect Time is not working properly...

With some answering machines, there is simply no Quiet Detect Time that will allow both reception of faxes and uninterrupted voice messages. Even in this case, however, you can set up the unit to receive both phone and fax messages from callers on touch-tone lines. Follow this procedure:

1.Set the Quiet Detect Time to 00.

2.Alter your phone message to tell callers that they can send a fax by pressing the Remote Reception Number (factory set to 5), followed by the “ ” key twice, and then the FAX START key of their fax machine.

Answering Machine Backup

There may be times when the tape on your answering machine becomes full, or when the answering machine itself malfunctions. It is still possible to receive faxes even under these conditions, however, by turning on the Auto Receive function. The unit will automatically answer all calls after five rings. To use this function, follow the procedure below.

Factory setting: 2 (OFF)

Step Press these keys

Comments

1

FUNCTION

TUV

“A.M. MODE” will appear in the display.

2 ABC

“SELECT AUTO RECEIVE” will appear in the display.

3

ABC

 

 

or

Press 1 to turn Auto Receive on, or 2 to turn it off.

4

STOP

STOP

Press the STOP key twice to exit.

Note: If you are using Auto Receive, make sure that your answering machine is set to answer on four rings or less. Otherwise, the unit will take over all calls, preventing callers from leaving voice messages.

INITIAL SETTINGS

2-25

Image 33
Contents Page Important safety information Table of Contents Troubleshooting Choosing a Location IntroductionParts Identification Connections Connecting the Telephone Line CordConnecting Other Devices Final PreparationsComments Look at the Operation Panel Initial SettingsAdjusting the Beep Volume Using the Arrow KeysAbout the Liquid Crystal Display Step Press these keys CommentsSetting the Length of Alarm Beeps Adjusting the Ringing VolumeTurning Key Beeps Off Setting the languageHow to Enter Characters Fax SetupEntering Your Name and Fax Number Setting the Date and Time Auto Summer Time Setting Auto mode Selecting the Reception ModeManual mode ModeSetting the Number of Rings for Manual Reception Setting the Number of Rings for Auto ReceptionOr or or Selecting the Reception Paper SizePaper Size Main Cassette Setting theTray Paper SizeSetting the Number of RecallTimes Setting the Recall Interval Setting the Index Function Setting Up the Unit for Use with a PC Modem Setting Fine Resolution PriorityUsing the Remote Reception Function PBX setting Storing Numbers for Automatic Dialing Use the following procedure to clear numbers Chain Dialing for Long Numbers Storing Numbers Under Group Keys SettingEnter the name of the group Quiet DetectTime Using the Unit with an Answering MachineIf Quiet Detect Time is not working properly Answering Machine BackupInitial Settings When using the ADF One sheet at a time When using the original tableSeveral sheets at once Unsuitable Originals Sending Documents Setting the DocumentSending Documents Optional Transmission Settings ResolutionContrast Cover Sheet Auto Cover Sheet Direct Keypad Dialing Dialing and TransmittingSpeed Dialing Rapid Key DialingChain Dialing Using the Search Key RedialingBeginning Using Manual Mode Using Auto ModeUsing A.M. Mode Receiving FaxesReceive Reduce Optional Reception SettingsFooter Printing When using manual sending and receivingSpecial Functions Memory BackupMemory Substitute Reception into MemoryData Transfer Press the SPEED/SEARCH key Enter a Speed Dial number Transmission ReservationSpecial functions When using the original table Broadcasting Press the appropriate Group key. Transmission will begin Broadcasting using a Group keySetting the Polling Key PollingPolling Others Programming a Memory Polling Operation Being Polled Memory PollingClearing Documents Adding to DocumentsCode Timer Operations3or Anti Junk Fax Junk FAX # Mode will appear in the display Transmissions Activity Report Printing Out ReportsOptional Setting List Printing Transaction Reports Activity Report Auto ListingProblem Check and Remedy TroubleshootingDisplay Messages Messages and SignalsSound Type Duration Meaning Audible Signals4TROUBLESHOOTING ADF Resolution in Text mode Dial modeResolution in Half tone mode Half tone mode Grayscale levelPrintable setting lists Delayed faxingBroadcasting PollingAutomatic Dialing Anti Junk FaxBroadcasting Dpi dots per inchReceive Reduce Reception modeRemote Reception Transmission ReservationQuick Reference Quick REFERENCE-ii Index INDEX-ii Page ALL Rights Reserved