Toshiba Copier manual Anti Junk Fax

Special Functions

To cancel a timer operation:

If you need to cancel a timer operation after it has been set, follow the steps below:

If the timer operation is a transmission operation, you will need to know the number assigned to it. If you do not remember the number (it appears in the display when you set the operation), print out the Timer List. See “Printing Out Reports” in this chapter for details on how to print out the Timer List.

Step Press these keys		Comments
1	FUNCTION	“TIMER MODE” will
		appear in the display.
2	ABC	Select “CLEAR”. “ENTER
		# (1-3)” will appear in the
		display.
3		Enter the 1-digit number
		assigned to the operation.

4 ENTER

(example)	“CLEARED” will appear in
	the display.

5 STOP STOP

Press the STOP key twice to exit.

Anti Junk Fax

You can avoid wasting fax paper by using the Anti Junk Fax function. This function prevents the reception of faxes from up to ten specified parties.

Factory setting : 2 (OFF)

To turn the Anti Junk Fax feature on and off, use the following procedure:

Step Press these keys Comments

1 FUNCTION MNO

“ANTI JUNK FAX” will appear in the display.

2

3

ENTER	“ANTI JUNK SELECT” will
	appear in the display.
ABC	Turn Anti Junk Fax on or
or	off.

4 STOP STOP

Press the STOP key twice to exit.

4-24 HOW TO USE THE FAX FUNCTION