Agilent Technologies FS2331 Product Warranty, Limitation of warranty, Exclusive Remedies

Page 5

Product Warranty

Due to the complex nature of the FS2331 and the wide variety of possible customer target implementations, the FS2331 has a 30 day acceptance period by the customer from the date of receipt. If the customer does not contact FuturePlus Systems within 30 days of the receipt of the product it will be said that the customer has accepted the product. If the customer is not satisfied with the FS2331 they may return the FS2331 within 30 days for a refund.

This FuturePlus Systems product has a warranty against defects in material and workmanship for a period of 1 year from the date of shipment. During the warranty period, FuturePlus Systems will, at its option, either replace or repair products proven to be defective. For warranty service or repair, this product must be returned to the factory.

For products returned to FuturePlus Systems for warranty service, the Buyer shall prepay shipping charges to FuturePlus Systems and FuturePlus Systems shall pay shipping charges to return the product to the Buyer. However, the Buyer shall pay all shipping charges, duties, and taxes for products returned to FuturePlus Systems from another country.

FuturePlus Systems warrants that its software and hardware designated by FuturePlus Systems for use with an instrument will execute its programming instructions when properly installed on that instrument. FuturePlus Systems does not warrant that the operation of the hardware or software will be uninterrupted or error-free.

Limitation of warranty

The foregoing warranty shall not apply to defects resulting from improper or inadequate maintenance by the Buyer, Buyer-supplied software or interfacing, unauthorized modification or misuse, operation outside of the environmental specifications for the product, or improper site preparation or maintenance. NO OTHER WARRANTY IS EXPRESSED OR IMPLIED. FUTUREPLUS SYSTEMS SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Exclusive Remedies

THE REMEDIES PROVIDED HEREIN ARE BUYER’S SOLE AND EXCLUSIVE REMEDIES. FUTUREPLUS SYSTEMS SHALL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER BASED ON CONTRACT, TORT, OR ANY OTHER LEGAL THEORY.

Product maintenance agreements and other customer assistance agreements are available for FuturePlus Systems products. For assistance, contact the factory.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Revision DDR Sdram Analysis Probe FS2331How to reach us Product Warranty Signal Connections For Sales and Marketing Support For Technical SupportExclusive Remedies Product WarrantyLimitation of warranty Introduction Probe Cable, Connector NumberingDefinitions Logic Analyzer ModulesFS2331 100 pin Connector to Pod Diagram Probe Components Probe Feature SummaryFS2331 Probe Description Probe Design DDR CommandsState Clock Generation DDR DataPage Pod Clock Domain Clock Rate Probe Pod AssignmentOn closed Switch # Default factory Function PositionProbe Switch Settings Connecting Power to the FS2331 Probe Logic Analyzer Signal Threshold Voltage SettingsConnecting the Probe to the Logic Analyzer Card Requirements for PC2700 Systems Recommended Logic Analyzer Card Requirements16753/4/5/6 Setting up the 169xx Analyzer Setting up the 167xx AnalyzerSoftware Requirements System Software 169xx LicensingTiming Analysis All DDR speeds and supported analyzer cards Card Configurations for State Analysis Probing multiple DDR busses Interleaved memory If User is dedicating a Connecting to your Target System Chip Select§ Isolate the Dedicated DIMM’s pin Chip Select Jumper locations§ Sleeve the Pin Unused Pods § Wire from the adjacent Dimm slot to the isolated pinOffline Analysis Filtering Timing Analysis Operation Loading the Inverse Assembler and Decoding DDR CommandsState Analysis Operation Taking a Trace, Triggering, and Seeing Measurement ResultsInverse Assembler and Decoding DDR Commands Tracing the Serial Presence Detect Signals Using Eye Finder with the FS2331 DDR Probe Using EyeScan with the FS2331 Probe Dimm Signal Loading Option Using the FS2331 DDR Probe with an Interposer FS1024/25FS2331 Calibration Page Set Command sample position Page Page Write Burst Data Valid Position Page Page Page Read Burst Data Valid Position Page Page Page Set the final analyzer sample position Adjust the delay line value to maximize R/W overlapPage Standards supported General InformationSamtec Signal Connections J1 DataSA0 CB4 J2 Data and CommandSpare J3 Command and Data Buffcmdclk DM5DQS14 J4 DataDQS7
Top Page Image Contents