2.Safety and Design
|
| Fig. 2 |
|
1 | 2 | 3 | 2 |
|
5
5
7
5
4
4
9
14
17 Cover = ramp
Fig. 3
When the instrument is delivered, check the tilt indicators on the packaging.
If the arrowhead is blue, the shipment was transported laying flat, was tilted at too great an angle or fell over during transport.
Note this on the shipping documents and check the shipment for possible damage.
8 | 8 | 9 |
|
|
|
|
| ||
|
| 8 |
|
|
| 8 |
|
|
|
8 |
| 10 | ||
| 11 | 11 |
|
|
|
|
| ||
Opening the packaging
1.Remove the 3 screws (1) on each of the two sides of the box (7) at the top.
2.Remove the 2 screws on each of the 4 hinges (2) on the front and rear side of the box.
Do NOT remove the screws of the hinges on the top lid!
3.Remove 1 screw (3) between the two hinges on the front and rear side of the box.
4.Remove the 3 screws (4) at the bottom on all four sides of the box.
5.Of the two vertical rows of screws (5), remove one on either side (which side does not matter) entirely.
8 | Operating Manual V1.1 – 05/2007 |