Leica manual Instrument Controls, Control Panel Fields on the CM1950 Control Panel Field

7.Instrument Controls

7.1Control Panel Fields on the CM1950 – Control Panel Field 1

Display of actual and target chamber	Display of actual and target specimen
temperatures	head temperatures
Fig. 32

Display of real time, defrost time and error messages

Button to	Button to	+/- buttons to		+/- buttons to
enable/disable	enable/disable	select		select
vacuum	the Peltier	chamber		specimen
extractor,	element	temperature		head
				temperature
Extraction
force intensity
			Max-Cool button to
selectable
			select the maximum
from 1-5 (see
			low temperature of
following page
			the specimen head
for more
			directly (-50°C)
information)

+/- buttons to		"Melting		UVC
select real		Snowflake"		disinfection,
time		button to		(short time 30min,
		activate manual		long time 180min)
+/- buttons to defrost
select defrost
	time
			ON/OFF button of
			illumination
		Press the key button to
		lock/unlock the entire
		keypad.
		(Refer to following page
		for activation		of the
		specimen head)

EMERGENCY STOP switch to the right of control panel field 1 (motorized instruments only)

For danger situations during motorized sectioning.

•Immediate stop of the sectioning process – motor stops – LED in E-Stop is illuminated in red.

•Turning in direction of arrow cancels the stop – LED in E-Stop goes out.

•Select single stroke (Single) or continuous stroke (Cont.) operating mode again.

30 Operating Manual V1.1 – 05/2007