13. Decontamination Certificate (master)
Dear Customer,
Any product which is to be returned to Leica Microsystems or serviced on site, must be cleaned and decontaminated in the appropriate manner. Leica accepts that it is not possible to decontami- nate for CJD and its variants and in this instance following current customer safety guidelines is acceptable. Equipment exposed to CJD samples cannot be returned to Leica Microsystems for repair.
This certificate, duly completed, must be placed in the unit prior to packaging or handed over to the service engineer. Packages will not be opened nor servicing commenced until the Company or service engineer have received a satisfactory certificate. Should returned goods be considered a hazard by the Company, they will be returned immediately to the customer at his/her expense.
NB: Microtome knives must be in boxes.
Description |
|
|
|
| Name/Model | Fabr. No. | |
|
|
|
|
| KAT No. |
| Quantity |
|
|
|
|
|
|
|
| Tick Box A if applicable. Otherwise please complete all parts of B, providing |
|
|
|
| further information as requested or appropriate. |
A |
|
|
|
|
Yes |
| This equipment has not been in contact with unfixed biological samples. | ||
| ||||
|
|
|
|
|
B1 This equipment has been exposed internally or externally to hazardous materials as
Yes No indicated below:
Blood, body fluids, pathological samples
Other biohazards
Chemicals/substances hazardous to health
Other hazards
2This equipment has been cleaned and decontaminated:
Yes No |
| If yes, give details of the method: | ||
|
|
|
|
|
|
|
|
| If no*, please indicate why not: |
Please provide further detail here:
* Such equipment must not be returned without the written agreement of Leica Microsystems.
70 | Operating Manual V1.1 – 05/2007 |