Leica CM1950 manual Technical Data

Page 14

3.Technical Data

All specifications related to temperature are valid only up to an ambient temperature of 18°C to 35°C and a relative humidity of no more than 60%.

Type

Nominal voltage (±10 %) Nominal frequency Power draw

Max. start-up current for 5 sec. Protective class

Circuit breaker:

(MDA made by Schurter) Pollution degreeOvervoltage installation category Heat emission (max.)

Approval

according to IEC-1010; UL 3101

-1

-2

-3

100 VAC

120 VAC

230 VAC

50/60 Hz

60 Hz

50 Hz

1900 VA

1900 VA

1900 VA

35A eff.

35 A eff.

25 A eff.

I

I

I

15A M3

15A M3

15A M3

2

2

2

II

II

II

1900 J/s

1900 J/s

1900 J/s

CE/c_CSA_us

CE/c_CSA_us

CE/c_CSA_us

Microtome

Type:

Rotary microtome,

 

encapsulated

Section thickness range

1 to 100μm

Trimming range:

 

Clinic

10 - 40μm

Research

1 - 600μm

Total specimen feed

25mm + 1mm

Vertical stroke

59mm ±0.5mm

Specimen retraction

20μm(canbedeactivated)

Maximum specimen size

50 x 80mm

Cutting speed

Slow: 0-50 strokes/min

 

Fast: 0-85 strokes/min

 

Vmax: 85-90 strokes/min

Specimen orientation

8° (x, y-axis)

For additional details, see p. 32

Electric coarse feed

Slow300μm/s

Fast900μm/s

For "Site Requirements," refer to item 6.1 (page 20).

Lamp

50/60 Hz-Version: Osram DULUX L 18W/840

Cryostat

Dimensions:

 

Width (w/o handwheel)

700 mm

Width (with handwheel)

835 mm

Depth (cabinet only)

850 mm

Height (total)

1215 mm

Working height (armrest)

1025 mm

Weight:

 

Weight (w/motor and suct.)

193 kg

Weight (w/motor, w/o suct.)

185 kg

Weight (w/o motor, w/ suct.)

183 kg

Weight (w/o motor, w/o suct.)

175 kg

Weight (w/ specimen head cool.)

165 kg

Weight (w/o specimen head cool.)

145 kg

General information

Operating temperature range: 18°C to 35°C Temperature range

during storage:

+5°C to +55°C

Relative humidity:

max. 60%,

 

non-condensing

Storage humidity:

< 60%

14

Operating Manual V1.1 – 05/2007

Image 14
Contents Leica CM1950 Page Page Table of contents 12.2 11.112.1 12.3Qualification of Personnel Symbols Used in This Manual and Their MeaningImportant Information Designated UseUnpacking and Installation Safety and DesignGeneral Safety Instructions Opening the packaging Removing the packaging Ramp assemblyTransport to the Installation Location Safety Features Microtome knivesKnife guard Securing/Locking the HandwheelCleaning, Disinfection Turning the Instrument Back On Removal of the Microtome MaintenanceHandling Specimens Defrosting Technical Data Technical Data Refrigeration system CM1950, 50 Hz CM1950, 60 HzStandard Delivery Set of filters 5 piecesHandwheel, motorized General Overview Control Panel Fields and Cryostat Chamber Right side InstallationSite Requirements Left sideTransport to the Site Assembling the Handwheel Emergency-stop function active, or Locking/Unlocking the HandwheelCentering the Handwheel Optional Only for instruments sold in Japan Selecting the frequency Connection to Power Supply SystemExisting power system Installation Inserting the Section Waste Tray Installing the Storage Systems Optional For reasonsShelf, Movable Optional Section waste tray with the a Cutout a facing the userInstalling the Heat Conductor Block, Stationary Optional Installation Mark for suction nozzle Instrument Controls Control Panel Fields on the CM1950 Control Panel Field12 o’clock Position 6 o’clock 20.0μm Retraction0μm 60.0μmBrief press of the button retracts the specimen by 20μm Coarse feed functionsMotion continues as long as the button is held Control panel 3 Motorized sectioning optional Sectioning modesDisinfection Duration 30min Duration 180 min Leica Cryofect is not available in all countriesWorking with the Instrument Turning the Instrument OnConfiguring the Parameters Working with the Instrument Working with the Instrument Manual defrosting of the specimen cooling Entering the trimming thickness Working with the Precooled Cryostat 8.4.1 Preparatory Work Trimming with Extraction Anti-roll Guide Installed Handwheel position 12 3 o’clock, valve open all the way Cutting with Extraction Anti-roll Guide installed Shut off VAC LED in VAC button goes outSpeed Extract. value 1μm 5 μm 40% 60% 80% 100% 10μm Speed10μm 40% 60% 80% 100% 20μm 30μm 40μm Working with the Instrument Problem Causes Remedies TroubleshootingProblems During Work Cryochamber Sections tear Alternately Longer sufficient Temperature Selection Chart in minus C Tissue type Chamber temperatureOptional Accessories Ordering InformationCryofect, VPE Leica Cryofect 4x 350ml Lever 6 for the lateral shift When using low-profile blades, the rulerWith anti-roll guide Lever 7 for clamping the bladeBlade holder CE with finger rest for NB + BB Inserting the blade into knife holder CE Will result Cleaning the knife holder CE Daily cleaning Unscrew the bolts 35 of the pressure plateNot Visible Optional Accessories Anti-roll guide system Optional Accessories Specimen discs in various dimensions Optional Accessories Maintenance and Cleaning General MaintenanceChanging Fuses Replacement of the Lamp/UVC Lamp Installation of the new lamp NB Microtome knives must be in boxes This equipment has been cleaned and decontaminatedDecontamination Certificate master Yes No indicated belowBU Return Authorization Number Anne De Greef-Safft President Biosystems Division EC Declaration of ConformityWarranty and Service Peoples Republic of China