Leica CM1950 With anti-roll guide, Lever 6 for the lateral shift, Lever 7 for clamping the blade

11. Optional Accessories

Blade holder CE with anti-roll guide for low-profile (NB) and high-profile (BB)

1

64

•	With blade ejector (1)
•	With knife guard (2)
• Integrated lateral shift and stable base
• Clearance angle adjustment (5) with 3 mm

5

47

12

3

28

9

Fig. 41

Fig. 41a

Allen key (see detail image 5, to left at knife

holder) - recommended angle from 2° to 5°.

• With anti-roll guide (4)

• Lever (6) for the lateral shift

• Lever (7) for clamping the blade

• Lever (8) for clamping the base (9) to the

dovetail guide in the chamber

• Pressure plate (3) for section extraction

• When using low-profile blades, the ruler

(7, Fig. ) must be inserted.

10

6 10

11

14

13

Fig. 42

Assembling the anti-roll guide system (for the blade holder CE)

1.Insert the glare-minimizing glass insert into the interchangeable frame and tighten it evenly using the knurled screw (10).

2.Insert the shaft (11) of the metal frame for exchangeable glass inserts from above into the bore of the swinging arm (12) in such a way that the pin rests in the notch.

3.Push the white plastic plate (14) from below onto the shaft (11).

4.Screw the knurled nut (13) from below onto the shaft (11).

The glass of the anti-roll guide can be used from all 4 sides when replace- ment is necessary (the glass stage plate can be reordered).

Leica CM1950 – Cryostat 55