4400 and 6400 Series User Guide
Storing Abbreviated Dialling Under a DSS Key
Each button can be programmed with the number that you would normally dial. Typically, you would use this for an external number or a system or personal short code. Consult your system administrator for a list of short codes.
To store numbers under a DSS key:
1.Press 
Menu.
2.Press 
and 
Next/Prev and then press Prog.
0-9 or DSSKey is displayed.
3.Press the dial pad key
If entering an external number, remember to include the required access code, for example 9.
Note
You can store partial strings. For example; you can store an international dial prefix for all calls to a particular country.
4.Press Done. The main screen is displayed.
5.To store another number, press 
Menu again and repeat steps 1 to 4.
or
1.Press Menu 
.
2.Press 
and 
Next/Prev to search and then press Admin.
3.Press 
and 
Next/Prev to search and then press AD.
4.Enter the number to store.
Note
You can store partial strings. For example; you can store an international dial prefix for all calls to a particular country.
5.Press the required DSS key and then press Cont.
6.Press another DSS key or press 
Exit.
4400 and 6400 Series User Guide | Page 34 |
IP Office 3.2 |