Hitachi hitachi series inverter user manual 255

Option		Terminal		Function Name		Description
Code		Symbol
58		MI3	General purpose input		ON	General purpose input (3) is made ON under EzSQ
			(3)		OFF	General purpose input (3) is made OFF under EzSQ
59		MI4	General purpose input		ON	General purpose input (4) is made ON under EzSQ
			(4)		OFF	General purpose input (4) is made OFF under EzSQ
60		MI5	General purpose input		ON	General purpose input (5) is made ON under EzSQ
			(5)		OFF	General purpose input (5) is made OFF under EzSQ
61		MI6	General purpose input		ON	General purpose input (6) is made ON under EzSQ
			(6)		OFF	General purpose input (6) is made OFF under EzSQ
62		MI7	General purpose input		ON	General purpose input (7) is made ON under EzSQ
			(7)		OFF	General purpose input (7) is made OFF under EzSQ
65		AHD	Analog command hold		ON	Analog command is held
					OFF	Analog command is not held
66		CP1		Multistage-position	ON	Multistage position commands are set according to the
				switch (1)	OFF	combination of these switches.
67		CP2		Multistage-position	ON
				switch (2)	OFF
68		CP3		Multistage-position	ON
				switch (3)	OFF
69		ORL	Limit signal of homing		ON	Limit signal of homing is ON
					OFF	Limit signal of homing is OFF
70		ORG	Trigger signal of		ON	Starts homing operation
				homing	OFF	No action
73		SPD	Speed/position		ON	Speed control mode
				changeover	OFF	Position control mode
77		GS1	GS1 input		ON	EN60204-1 related signals:
					OFF	Signal input of “Safe torque off” function.
78		GS2	GS2 input		ON
					OFF
81	485			Start EzCOM	ON	Starts EzCOM
					OFF	No execution
82		PRG	Executing EzSQ		ON	Executing EzSQ program
				program	OFF	No execution
83		HLD		Retain output	ON	Retain the current output frequency
				frequency	OFF	No retention
84		ROK	Permission of Run		ON	Run command permitted
				command	OFF	Run command is not permitted
85		EB	Rotation direction		ON	Forward rotation
				detection (C007 only)	OFF	Reverse rotation
86		DISP	Display limitation		ON	Only a parameter configured in b038 is shown
					OFF	All the monitors can be shown
255		no		No function	ON	(input ignored)
					OFF	(input ignored)

74