Hitachi hitachi series inverter user manual Monitoring functions

Monitoring functions

NOTE:. Mark “ ” in b031=10 shows the accessible parameters when b031 is set “10”, high

level access.

* Please change from"04 (Basic display)" to "00 (Full display)" in parameter

B037 (Function code display restriction), in case some parameters cannot be displayed.

IMPORTANT

Please be sure to set the motor nameplate data into the appropriate parameters to ensure proper operation and protection of the motor:

b012 is the motor overload protection value

A082 is the motor voltage selection

H003 is the motor kW capacity

H004 is the number of motor poles

Please refer to the appropriate pages in this guide and the Instruction Manual for further details.

									Run	Units
Func.	Name	Description							Mode
Code									Edit
	Output frequency monitor	Real time display of output frequency								Hz
D001									−
		to motor from
		0.0 to 400.0Hz
		If b163 is set high, output frequency
		(F001) can be changed by up/down
		key with d001 monitoring.
D002	Output current monitor	Filtered display of output current to							−	A
		motor, range is
		0 to 655.3 ampere (~99.9 ampere for
		1.5kW and less)
D003	Rotation direction monitor	Three different indications:							−	−
		“F” …Forward
		“o” …Stop
		“r” …Reverse
D004	Process variable (PV),	Displays the scaled PID process							−	% times
	PID feedback monitor	variable (feedback) value (A075 is								constant
		scale factor),
		0.00 to 10000
D005	Intelligent input	Displays the state of the intelligent							−	−
	terminal status	input terminals:
								ON
								OFF
		7	6	5	4	3	2	1
		Terminal numbers

46