Installing Wheel Guards
(Type 27 & Type 1 Wheel Guards)
A Type 27 guard must be ! WARNING used with all grinding
wheels, bonded body sanding flap discs, wire brushes and wheels. The tool may be used without a guard only when sanding with conventional sanding discs.
To attach guard (Fig. 5):
1. Unplug tool from power source.
2. Position appropriate guard on spindle neck so arrows on guard and spindle neck align.
3. Rotate wheel guard clockwise 90º until guard clicks in place.
4. Adjust guard by depressing guard release button and rotate to desired position. Always position wheel guard between operator and work piece and direct sparks away from operator, Fig. 6.
5. Allow guard release button to click in place.
To remove wheel guard:
1.Depress guard release button and rotate guard until arrows on guard and spindle neck align.
2.Remove guard from spindle neck.
FIG. 5 | WHEEL |
| GUARD |
SPINDLE
NECK
GUARD
RELEASE
BUTTON
FIG. 6