Attaching or Removing Battery Pack
1.To connect the battery pack:
Line up the alignment marks and at- tach the battery pack.
•Slide the battery pack until it locks into position.
Alignment marks
VI. OPERATION
1.Push the switch lock lever down, pull the power switch.
•The speed increases with the amount of depression of the power switch.
2.To remove the battery pack:
Push on the button from the front to release the battery pack.
Button
2.Once cutting is finished, release the power switch.
3.Check that the temperature of the blade has dropped sufficiently, and then re- move the blade.
Cutting
NOTE:
•Check that there are no obstacles to cut underneath workpiece.
•Check that there are no objects such as nails in the material to be cut.
If the blade comes into contact with any such objects during cutting, a strong reaction force will be gener- ated and severe injury may occur.
•Do not place your hand on the object in the direction cutting is to take place. If this is not observed, there is a risk of injury.
•Do not touch the jigsaw blade im- mediately after cutting.
If this is not observed, burns may oc- cur.
- 12 -