Panasonic EY6903 Accessories, Appendix, Use only bits suitable for size of drill’s chuck, EY6932

. ACCESSORIES

Use only bits suitable for size of drill’s chuck.

. APPENDIX

RECOMMENDED SPEED SELECTION

CAUTION:

USE AT LOW SPEED WHEN STRONG FORCE IS NEEDED DURING OPERATION. (Using at high speed while a strong force is applied may cause a motor breakdown.)

Use the following as a guide to select low or high speed for the job. EY6903

		DRILLING			SCREW
					TIGHTENING
		WOOD /	METAL	METAL HOLE SAW
MATERIAL/	MORTAR /	YELLOW PINE			Wood screws
CONDITION	BRICK	Thickness: 40 mm	Cold-rolled steel plate (SPC)
		(1-37/64") or less	Thickness: 1.6 mm (1/16”) or less
HIGH	ø 10 mm (3/8") or less	Not used	ø 4.5 mm (11/64")	Not used	ø 3.5 mm (9/64")
			or less		or less
LOW	ø 10 mm (3/8") or less	ø 25 mm (63/64")	ø 13 mm (1/2")	ø 26 mm	ø 6 mm (15/64")
	(Slow operation)	or less	or less	(1-1/64") or less	or less

EY6932

		DRILLING			SCREW
					TIGHTENING
		WOOD /	METAL	METAL HOLE SAW
MATERIAL/	MORTAR / BRICK	YELLOW PINE			Wood screws
CONDITION		Thickness: 40 mm	Cold-rolled steel plate (SPC)
		(1-37/64") or less	Thickness: 1.6 mm (1/16”) or less
HIGH	ø 10 mm (3/8") or less	Not used	ø 6.5 mm (1/4")	Not used	ø 4 mm (5/32")
			or less		or less
LOW	ø 13 mm (1/2") or less	ø 36 mm (1-27/64")	ø 13 mm (1/2")	ø 34 mm (1-11/32")	ø 6.8 mm (17/64")
	(Slow operation)	or less	or less	or less	or less

- 8 -