Panasonic EY6903 operating instructions Specifications, Main Unit, Battery Pack, Battery Charger

. SPECIFICATIONS

MAIN UNIT

Model			EY6903	EY6932
	Screw	Machine screw	M3 - M5	M3 - M6
		Wood screw	ø 2.1 - ø 5.8 mm (5/64" - 15/64")	ø 2.1 - ø 6.8 mm (5/64" - 17/64")
	driving
		Masonry screw	ø 4 - ø 6 mm (5/32" - 15/64")
Capability		Mortar/Brick	ø 3 - ø 10 mm (1/8” - 3/8”)	ø 3 - ø 13 mm (1/8" - 1/2")
	Drilling	Wood	ø 3 - ø 25 mm (1/8” - 63/64”)	ø 3 - ø 36 mm (1/8" - 1-27/64")
		Metal	ø 1.5 - ø 13 mm (1/16" - 1/2")
		Metal hole saw	Max. ø 26 mm (1-1/64")	Max. ø 34 mm (1-11/32")
Motor			DC Motor 12 V	DC Motor 15.6 V
No load speed		LOW	80 - 550/min (rpm)
		HIGH	300 - 2000/min (rpm)
Blows rate per minute		LOW	1200 - 8250/min (bpm)
		HIGH	4500 - 30000/min (bpm)
Chuck capacity			ø 1.5 - ø 13 mm (1/16" - 1/2")
Maximum torque		LOW	17.8 Nm (182 kgf-cm or 158 in-lbs)	25.5 Nm (260 kgf-cm or 225 in-lbs)
		HIGH	4.6 Nm (47 kgf-cm or 41 in-lbs)	5.9 Nm (60 kgf-cm or 52 in-lbs)
Blow strength			1.7 kN (173 kgf, 370 lbs.f)
Overall length			236 mm (9-5/16")
Weight (with battery pack)			2.2 kg (4.9 lbs)	2.4 kg (5.3 lbs)

BATTERY PACK

Model	EY9200	EY9201	EY9230	EY9231
Storage battery		Ni-MH Battery
Battery voltage	12 V DC (1.2 V × 10 cells)		15.6 V DC (1.2 V × 13 cells)

BATTERY CHARGER

Model			EY0110
Electrical rating		See the rating plate on the bottom of the charger.
Weight			0.78 kg (1.72 lbs)
	7.2V	9.6 V	12V	15.6V	18V	24V
	EY9065	EY9080	EY9001
1.2Ah	EY9066	EY9086	EY9006
		20min.
		EY9180	EY9101
1.7Ah		EY9182
Charging time		25min.
	EY9168		EY9106	EY9136		EY9117
2.0Ah
	30min.		30min.			60min.
3.0Ah			EY9200	EY9230		EY9210
			45min.			90min.
3.5Ah			EY9201	EY9231	EY9251
			55min.		65min.

Note: This chart may include models that are not available in your area. Please refer to the catalogue.

- 9 -