HP 4600hdn 4600n manual 151

Message

Description

Action

TRAY XX OPEN For help	The specified tray is open or not	Close the tray.
press	closed completely.
alternates with
Ready For menus press
✔
TRAY XX SIZE= <XXXX	A non-detectable media size was	1. Adjust the side and rear
SIZE> For help press	selected from the menu and the tray	media guides against
	switch is set to STANDARD.	the paper.
	The size selected from the menu	2. If the media used is
alternates with		Letter, A4, Executive,
	does not match the size detected by	B5 JIS, A5, or Legal
TRAY XX SIZE= <XXXX	the tray. Size detection occurs when	sized, the tray switch
SIZE> To change, move	the tray switch is set in the	should be set to
switch in tray XX	STANDARD position.	STANDARD. Set the
		tray switch to CUSTOM
		for all other media sizes.
		The tray switch must be
		set before the size can
		be selected from the
		control panel.
		3. Reset the paper size in
		the paper handling
		menu.
TRAY XX (TYPE) (SIZE)	The printer is reporting the current	1. To change media type,
Size detected by tray	configuration of tray XX. The tray	press ✔. Use		and
	switch is in the STANDARD position.	to highlight the type,
alternates with		then press ✔ to select.
		2. To change the media
TRAY XX (TYPE) (SIZE)		size to Letter, A4,
To change type press ✔		Executive, B5 JIS, A5,
		or Legal, leave the tray
		switch in the
		STANDARD position.
		3. To change the media
		size to other sizes,
		move the tray switch to
		CUSTOM, adjust the
		paper guides against
		the paper, and close the
		tray.
		4. Use	and	to
		highlight the media size,
		then press ✔ to select.

ENWW 151