Network configuration
| You might need to configure certain network parameters on the |
| printer. You can configure these parameters from the printer control |
| panel, the embedded Web server, or for most networks, from the |
| HP Web Jetadmin software (or the HP LaserJet Utility for Macintosh). |
|
|
Note | For more information about using the embedded Web server, see Using |
| the embedded Web server. |
| For a complete list of supported networks and for instructions on |
| |
| configuring network parameters from software such as the |
| HP Web Jetadmin software, see the HP Jetdirect Print Server |
| Administrator’s Guide. The guide comes with printers in which an |
| HP Jetdirect print server is installed. |
| This section contains the following instructions for configuring |
| network parameters from the printer control panel: |
| z configuring Novell NetWare frame type parameters |
| z configuring TCP/IP parameters |
| z disabling unused network protocols |
| Configuring Novell NetWare frame type |
| parameters |
| The HP Jetdirect print server automatically selects a NetWare frame |
| type. Select a frame type manually only when the print server selects |
| an incorrect frame type. To identify the frame type chosen by the |
| HP Jetdirect print server, print a configuration page from the printer |
| control panel. See Printer information pages. |
ENWW | 47 |