HP 4600hdn 4600n manual 150

Message

Description

Action

Setting saved	A menu selection has been saved.	No action necessary.
SIZE MISMATCH TRAY	The tray is loaded with media longer	1. Adjust the side and rear
XX=<SIZE> For help	or shorter in the feed direction than	media guides against
press	the size configured for the tray.	the paper.
		2. If the media used is
alternates with		Letter, A4, Executive,
		B5 JIS, A5, or Legal
Ready For menus press		sized, the tray switch
✔		should be set to
		STANDARD. Set the
		tray switch to CUSTOM
		for all other media sizes.
		The tray switch must be
		set before the size can
		be selected from the
		control panel.
		3. Reset the paper size in
		the paper handling
		menu.
Test terminated	A diagnostic test has been	No action necessary.
	terminated by pressing the CANCEL
	JOB button.
TRAY XX CONTAINS	The media type in the specified tray	1. To change media type,
UNKNOWN MEDIA	cannot be determined.	press ✔. Use		and
		to highlight the type,
		then press ✔ to select.
		2. To change the media
		size to Letter, A4,
		Executive, B5 JIS, A5,
		or Legal, leave the tray
		switch in the
		STANDARD position.
		3. To change the media
		size to other sizes,
		move the tray switch to
		CUSTOM, adjust the
		paper guides against
		the paper, and close the
		tray.
		4. Use	and	to
		highlight the media size,
		then press ✔ to select.
TRAY XX EMPTY (TYPE)	The specified tray is empty and	Refill the tray at a
(SIZE)	needs to be filled but the current job	convenient time.
	does not need this tray to print
alternates with	correctly.
Ready For menus press
✔

150 ENWW