Note | The first of three sets of numbers are the default settings. If there is not | |
| a number highlighted, a highlighted empty underscore appears. | |
| 12. | Press the or arrow to to increase or decrease the number |
| ||
|
| for configuring LOCAL or DEFAULT GATEWAY. |
| 13. | Press ✔ to move to the next set of numbers. |
| 14. | Repeat steps 12 and 13 until the correct local/default gateway is |
|
| entered. |
| 15. | Press the PAUSE/RESUME button to return to the Ready state. |
Disabling network protocols (optional)
By factory default, all supported network protocols are enabled.
Disabling unused protocols has the following benefits:
zdecreases
zprevents unauthorized users from printing to the printer
zprovides only pertinent information on the configuration page
zallows the printer control panel to display
Note | TCP/IP configuration cannot be disabled on the HP Color LaserJet |
| 4600 printer. |
|
|
To disable IPX/SPX
Note | Do not disable this protocol if Windows 95/98, Windows NT, ME, 2000, | ||
| and XP users will be printing to the printer. | ||
| 1. | Press ✔ to enter the MENUS. | |
| |||
| 2. | Press | to highlight CONFIGURE DEVICE. |
| 3. | Press ✔ to select CONFIGURE DEVICE. | |
| 4. | Press | to highlight I/O. |
| 5. | Press ✔ to select I/O. | |
| 6. | Press | to highlight EIO X (where X = 1, 2, or 3). |
| 7. | Press ✔ to select EIO X. | |
| 8. | Press | to highlight IPX/SPX. |
| 9. | Press ✔ to select IPX/SPX. | |
| 10. | Press | to highlight ON or OFF. |
ENWW | 51 |