5. Press ✔ to select SYSTEM SETUP.
6. Press | to highlight CLEARABLE WARNINGS. |
7.Press ✔ to select CLEARABLE WARNINGS.
8. Press | or | to select the appropriate setting. |
9.Press ✔ to set the selection.
10.Press PAUSE/RESUME.
Auto continue
You can determine printer behavior when the system generates an Auto Continuable error. ON is the default setting.
zON displays an error message for ten seconds before automatically continuing to print.
zOFF pauses printing any time the printer displays an error message and until you press ✔.
To set the auto continue
1. | Press ✔ to enter the MENUS. | |
2. | Press | to highlight CONFIGURE DEVICE. |
3.Press ✔ to select CONFIGURE DEVICE.
4. | Press | to highlight SYSTEM SETUP. | |
5. | Press ✔ to select SYSTEM SETUP. | ||
6. | Press | to highlight AUTO CONTINUE. | |
7. | Press ✔ to select AUTO CONTINUE. | ||
8. | Press | or | to select the appropriate setting. |
9.Press ✔ to set the selection.
10.Press PAUSE/RESUME.
Supplies low
The printer allows two options for reporting that supplies are low; CONTINUE is the default value.
zCONTINUE allows the printer to continue printing while displaying a warning until the supply is replaced.
zSTOP causes the printer to pause printing until you replace the used supply or press ✔, which allows the printer to print while continuing to display the warning.
ENWW | 37 |