
Note
Note
To enable or disable 
Changing settings for 
1. Press ✔ to enter the MENUS.
| 2. Press | to highlight CONFIGURE DEVICE. | 
3.Press ✔ to select CONFIGURE DEVICE.
4.Press ✔ to select PRINTING.
| 5. Press | to highlight DUPLEX. | 
6. Press ✔ to select DUPLEX.
7. Press or to select ON to enable 
8.Press ✔ to set the value.
9.Press PAUSE/RESUME.
10.Select 
To select 
| 80 | ENWW |