Job held timeout
This option sets the period of time that the system keeps files in job storage before deleting them from the queue. The default setting for this option is OFF; the other available settings are 1 HOUR, 4 HOURS, 1 DAY, and 1 WEEK.
NoteThis option is only available if a hard disk is installed.
To set the job held timeout
1. | Press ✔ to enter the MENUS. | |
2. | Press | to highlight CONFIGURE DEVICE. |
3.Press ✔ to select CONFIGURE DEVICE.
4. | Press | to highlight SYSTEM SETUP. | |
5. | Press ✔ to select SYSTEM SETUP. | ||
6. | Press | to highlight JOB HELD TIMEOUT. | |
7. | Press ✔ to select JOB HELD TIMEOUT. | ||
8. | Press | or | to select the appropriate time period. |
9.Press ✔ to set the time period.
10.Press PAUSE/RESUME.
Tray behavior options: use requested tray and manually feed
Tray behavior allows two user-defined options:
zUSE REQUESTED TRAY— Selecting EXCLUSIVELY ensures that the printer will not automatically select another tray when you indicate that a specific tray should be used. Selecting FIRST allows the printer to pull from a second tray if the specified tray is empty. EXCLUSIVELY is the default setting.
zMANUALLY FEED— If you select ALWAYS (the default value), the system always displays a prompt before pulling from the multipurpose tray. If you select UNLESS LOADED, the system will only display the prompt if the multipurpose tray is empty.
To set use requested tray
1. Press ✔ to enter the MENUS.
2. Press | to highlight CONFIGURE DEVICE. |
ENWW | 33 |