9.Press ✔ to set the selection.
10.Press PAUSE/RESUME.
Language
The option to set the default language appears when the printer is first initialized. As you scroll through the available options, the list will appear in the language that is highlighted. When the list appears in the language desired, press ✔ to set the language. You may also change the language at any time by following these steps:
To select language
1. | Press ✔ to enter the MENUS. | |
2. | Press | to highlight CONFIGURE DEVICE. |
3.Press ✔ to select CONFIGURE DEVICE.
4. | Press | to highlight SYSTEM SETUP. | |
5. | Press ✔ to select SYSTEM SETUP. | ||
6. | Press | to highlight LANGUAGE. | |
7. | Press ✔ to select LANGUAGE. | ||
8. | Press | or | to select the appropriate language. |
9.Press ✔ to set the selection.
10.Press PAUSE/RESUME.
To select language if the display is in a language you do not understand
1. | Press ✔ once. |
| |
2. | Press | three times. | |
3. | Press ✔ once. |
| |
4. | Press | two times. | |
5. | Press ✔ once. |
| |
6. | Press | ten times. | |
7. | Press ✔. |
|
|
8. | Press | or | to select the appropriate language. |
9.Press ✔ to set the selection.
10.Press PAUSE/RESUME.
ENWW | 39 |