1.Custom/Standard switch
1
When all three steps are completed, the display will return to the PAPER HANDLING menu. Once a Custom size is set for a tray, it will be retained until the switch in the tray is moved back to Standard.
Unit of measure
1. Press | to highlight UNIT OF MEASURE. |
2. Press ✔ to select UNIT OF MEASURE.
3. Press or to highlight the correct measurement.
4. Press ✔ to select the value.
X dimension
The X Dimension is the width of the page as it feeds into the printer.
1. Press | to highlight X DIMENSION. |
2. Press ✔ to select X DIMENSION.
3. Press | or | to highlight the correct value. |
4.Press ✔ to select the value. If the value entered is outside the vaild range, INVALID VALUE will appear for two seconds. The display prompts you to enter another value.
Y dimension
The Y Dimension is the length of the page as it feeds into the printer.
1. Press | to highlight Y DIMENSION. |
2. Press ✔ to select Y DIMENSION.
3. Press | or | to highlight the correct value. |
4.Press ✔ to select the value. If the value entered is outside the the valid range, INVALID VALUE will appear for two seconds. The display prompts you to enter another value.
ENWW | 69 |