18
19
10
11
8Holding the DIMM by the edges, align the notches on the DIMM with the bars in the DIMM slot.
Note If you have difficulty inserting the DIMM or closing the latches, make sure the notches on the bottom of the DIMM are aligned with the bars in the slot. If the DIMM still does not go in, make sure you are using the correct type of DIMM.
9Firmly press the DIMM straight into the slot. Close the locks on each side of the DIMM until they snap into place.
10Align the formatter board in the tracks at the top and bottom of the slot, and slide the board back into the printer. Replace and tighten the eight screws removed in step 2.
11Reconnect the power cable and interface cables, and turn the printer on.
12If you installed a memory DIMM, go to Enabling memory. If you installed a language font DIMM, go to Enabling the language font DIMM.
ENWW | 215 |