HP 4600hdn 4600n manual 152, See Configuring input

Message

Description

Action

TRAY XX (TYPE) (SIZE)	The printer is reporting the current	1. To change media type,
Size specified by user	configuration of tray XX. The tray	press ✔. Use and
	switch is in the CUSTOM position.	to highlight the type,
alternates with		then press ✔ to select.
		2. To change the media
TRAY XX (TYPE) (SIZE)		size to Letter, A4,
To change type press ✔		Executive, B5 JIS, A5,
		or Legal, set the tray
		switch to the
		STANDARD position
		and adjust the media
		guides to the correct
		positions.
		3. To change the media
		size to other sizes, leave
		the tray switch in the
		CUSTOM position,
		adjust the media guides
		against the media, and
		close the tray.
		4. Select the paper
		handling menu from the
		control	panel.
		Configure the size for
		the tray.
		5. See Configuring input
		trays for more details.
Unable to mopy job	A Mopy job cannot be mopied	No action necessary.
<JOBNAME>	because of a memory, disk, or
	configuration problem. Only one copy
	will be produced.
Unable to store job	A job cannot be stored because of a	Install additional memory
<JOBNAME>	memory, disk, or configuration	in the printer, or install a
	problem.	disk drive into the printer.
		If a disk drive is installed,
		delete previously stored
		print jobs.
USE INSTEAD? TRAY 2:	The printer is offering a selection of	Highlight the media with
[TYPE] [SIZE] TRAY 3:	alternate media to use for the print	and	. Press ✔ to
[TYPE]	job.	select a choice.
Validating supplies	A new cartridge has been installed	No action necessary.
For menus press ✔	and the printer is determining
	whether it is an HP or non-HP
alternates with	cartridge.
Ready For menus press
✔

152 ENWW