HP 4600hdn 4600n AppleTalk networks, LocalTalk configuration, LocalTalk network configuration

AppleTalk networks

Use the HP LaserJet Utility to set up the printer on an EtherTalk or LocalTalk network. For more information, refer to the HP Jetdirect Print Server Administrator’s Guide included with printers equipped with the HP Jetdirect print server.

LocalTalk configuration

The LocalTalk interface enables you to print directly from a stand- alone Apple Macintosh computer or from a Macintosh computer on a LocalTalk network. For specific information on configuring the computer and printer to print through a LocalTalk interface, refer to the printer’s getting started guide and the HP Jetdirect Print Server Administrator’s Guide.

Note	For LocalTalk configuration, the DIN-8 printer cable must be connected
	to the printer port of the Macintosh computer.

LocalTalk network configuration

To connect the printer to a Macintosh computer on a LocalTalk network, use the HP LocalTalk Cable Kit. You will need a kit for each printer and an additional kit for each Macintosh computer on the network.

UNIX/Linux networks

Use the HP Jetdirect printer installer for UNIX utility to set up the printer on HP-UX or Sun Solaris networks.

For setup and management on UNIX or Linux networks, use HP Web Jetadmin.

To obtain HP software for UNIX/Linux networks, visit HP Customer Care online at http://www.hp.com/support/net_printing. For other installation options supported by the HP Jetdirect print server, see the HP Jetdirect Print Server Administrator’s Guide included with printers equipped with the HP Jetdirect print server.

56 ENWW