Note
WWW
Allow transparencies to cool at least 30 seconds before handling them.
zIn the printer driver’s Paper tab, select Transparency as the media type. Also, make sure that the tray is correctly configured for transparencies.
zCheck that the transparencies meet the specifications for this printer. See Supported media weights and sizes. For more information, consult the HP LaserJet Family Paper specification Guide.
See http://www.hp.com/support/lj4600 for HP LaserJet Family Paper Specification Guide ordering information.
For downloadable manuals, go to http://www.hp.com/support/lj4600. When you connect, select Manuals.
zHandle transparencies by the edges. Skin oil on the surface of transparencies can cause spots and smudges.
zSmall, random dark areas on the trailing edge of solid fill pages may be caused by transparencies sticking together in the output bin. Try printing the job in smaller batches.
zThe selected colors are undesirable when printed. Select different colors in the software application or printer driver.
zIf you are using a reflective overhead projector, use a standard overhead projector instead.
Print quality problems associated with the environment
zThe printer is operating in excessively humid or dry conditions. Verify that the printing environment is within specifications. See Operating environment specifications.
Print quality problems associated with jams
zMake sure that all media is cleared from the paper path; see Paper jam recovery.
zThe printer recently jammed. Print two to three pages to clean the printer.
zThe media does not pass through the fuser causing image defects to appear on subsequent documents. Print two to three pages to clean the printer. However, if the problem persists see the next section.
ENWW | 187 |