Wayne-Dalton 3663-372 installation instructions Installing the Light Fixture

16	Installing the Light Fixture
Tools Needed:
		WARNING
Phillips Head
	TO AVOID ELECTRICAL SHOCK
Screwdriver
	DISCONNECT POWER TO THE
Flat Tip	RECEPTACLE AT THE FUSE/BREAKER
Screwdriver	BOX, BEFORE PROCEEDING WITH THE
Step Ladder	INSTALLATION OF THE LIGHT FIXTURE.
	IMPORTANT! THIS LIGHT FIXTURE HAS A
	GROUNDING TYPE PLUG WITH A THIRD
	(GROUNDING) PIN. THIS PLUG WILL ONLY
	FIT INTO A GROUNDING-TYPE OUTLET. IF
	THE PLUG DOES NOT FIT INTO YOUR
	OUTLET, CONTACT A QUALIFIED
	ELECTRICIAN TO INSTALL THE PROPER
	GROUNDING TYPE OUTLET. DO NOT ALTER
	THE PLUG IN ANY WAY.
	WARNING
	TO AVOID ELECTRICAL SHOCK/FIRE, DO
	NOT MOUNT THE LIGHT FIXTURE TO A
	RECEPTACLE WITH A METAL FACE
	PLATE.
	IMPORTANT! GARAGE DOOR MUST
	CLEAR LIGHT FIXTURE WHEN THE DOOR IS
	IN THE OPEN POSITION.
	The light fixture is designed to mount
	directly to a standard 120V duplex
	receptacle.
	Remove the screw in the receptacle
	cover. Holding receptacle cover in place,
	insert light fixture into the receptacle that
	has the ground hole farthest from screw
	hole.
	Secure light fixture to receptacle with a
	#6-32 x 3/4” phillips pan head screw.
	Install hole plug into the screw hole in the
	light fixture.
	NOTE: For temperature protection, the
	hole plug must be in place prior to using
	the light fixture.

Receptacle Cover

Remove Screw

#6-32 x 3/4”

Phillips Pan Head

Screw

Hole Plug

23Please Do Not Return This Product To The Store. Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need.

You can reach us Toll Free at 1-888-827-3667 for Consumer Assistance or online at www.wayne-dalton.com