Wayne-Dalton 3663-372 installation instructions Mounting Wall Station, Garage Door

13 Drum Wrap Installation

Drum

Tools Needed:

Step Ladder

Drum wraps (supplied with Torquemaster® counterbalance systems) are identified as right and left.

To install, place the drum wrap over the cable drum and under the idrive® disconnect cable. Align the outside flange over the outside edge of the cable drum

and push the drum wrap down onto the cable drum.

Wrap

Outside

Flange

Cable

Drum

Drum

Wrap

Cable

Drum

14		Mounting Wall Station
Tools Needed:		WARNING
Tape Measure	TO PREVENT POSSIBLE INJURY, INSTALL
Power Drill	WALL STATION OUT OF THE REACH OF
	CHILDREN AND IN A LOCATION WHERE
3/16” or	THE DOOR CAN BE SEEN WHEN THE
3/32" Drill Bit	OPENER IS ACTIVATED. DO NOT MOUNT
Phillips Head	WALL STATION NEAR OR NEXT TO
	GARAGE DOOR.
Screwdriver
	NOTE: For proper operation, mount the wall
	station on a flat surface.
	The wall station can be mounted to a NEMA
	standard electrical device box or directly to
	any wall surface. No wiring is required.
	Select appropriate place to mount wall
	station. To keep wall station out of the reach
	of children, locate it at least five feet up
	from the floor.

5’ Min

21Please Do Not Return This Product To The Store. Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need.

You can reach us Toll Free at 1-888-827-3667 for Consumer Assistance or online at www.wayne-dalton.com