17 | Attaching Diffuser | Power Outlet |
| ||
| Light Fixture | |
Tools Needed: | Screw a 75W (maximum) light bulb into | Mating Slots |
Step Ladder | light socket and snap diffuser into light | |
fixture. |
| |
|
| |
| When assembling diffuser, make sure all |
|
| three snap tabs are aligned and fully | Light Socket |
| snapped into the three mating slots of the |
|
| light fixture. |
|
| Turn receptacle power back on at fuse/ | 75W (MAX) |
| Light Bulb | |
| breaker box. The light should blink one | (Not Included) |
| time when the power is turned back on. | Snap Tabs |
NOTE: An accessory power outlet receptacle (600 Watt Maximum) is provided as part of the light fixture.
|
|
| Diffuser |
18 | Connecting Opener | (Ceiling) | Cable Clips |
| |||
|
| ||
| Power Cord |
| |
|
|
| |
Tools Needed: | WARNING |
|
|
Phillips Head | TO REDUCE THE RISK OF ELECTRICAL |
|
|
Screwdriver | SHOCK, DO NOT CHANGE THE POWER |
| #6 x 7/8 |
Step Ladder | CORD PLUG IN ANYWAY. | Plug Into Nearest | Wood Screws |
Power Outlet |
| ||
|
| ||
| The opener can be permanently wired. To |
|
|
| permanently wire the unit, see Permanent |
|
|
| Wiring option on page 39. |
|
|
| Plug the end of the power cord into the |
|
|
| closest grounding type receptacle |
|
|
| Otherwise, contact a service person for |
|
|
| further options. Excess power cord length |
|
|
| must be routed and contained safely away |
|
|
| from any moving parts. |
|
|
| As soon as power is applied to the opener, |
| Disconnect |
|
| Cable | |
| it should beep two times. |
| |
|
|
| |
| NOTE: Do not permanently attach power |
|
|
| cord to building! |
|
|
| NOTE: Use only the flexible cable clips |
|
|
| supplied with the opener. |
|
|
|
|
| Power Cord |
|
|
| No Interference |
|
|
| Between Power |
|
|
| Cord and |
|
|
| Disconnect Cable |
PRE-OPERATION
Please Do Not Return This Product To The Store. Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need. 24 You can reach us Toll Free at