Conair GB/ WSB manual Computer Outputs Wiring Supplement

		COMPUTER OUTPUTS - WIRING SUPPLEMENT
17 pin connector
This computer		output;
	drives	this device on the board;
		that goes	to the outside world through this connector;
			to drive this external device.
				wire color
	formerly optical		coupler outputs
		17 pin Amphonal connector
1	1	pin A	weigh bin dump air solenoid	brown
2	2	pin B	component 1 air solenoid	orange
3	3	pin C	component 2 air solenoid	blue
4	4	pin D	component 3 air solenoid (add)	gray
5	5	pin E	component 4 air solenoid (col)	purple
6	6	pin M	flow control air solenoid	yellow
7	7	pin F	component 7 air solenoid	red

solid state plug-in relays (4) on separate board

81 comp. 5 - additive auger motor outlet, panel front

92 comp. 6 - color auger motor outlet, panel front

103 strobe and beeper + opt. alarm relay output

114 mix motor outlet, panel side

12	5	pin G	comp. 8 -	external	SS relay	wt./red
13	6	pin H	comp. 9 -	external	SS relay	wt./yellow
14	7	pin J	comp. 10 - external SS relay			wt./green
15	8	pin K	comp. 11 - external SS relay			wt./blue
		pin L	alarm
		pin N	common line, all outputs. +24v			white
		pin P	comp. 12 (also air		drive mixer)
		pin R	neutral to 10 volt		signals (S,T)
		pin S	0-10 volt	extruder	control signal
		pin T	0-10 volt	line speed control signal

External SS relays are optional.

External SS relays and air solenoids may be exchanged.

Page 97