SPECIFICATIONS
TPBS016/0700
GRAVIMETRIC BATCH BLENDERS WSBM Series models
B
A
CONTROL (REMOTE MOUNTED)
MODELS | WSBM22 | WSBM131 | WSBM140 |
Performance characteristics |
|
|
|
Batch size lbs {g} | 0.882 {400} | 0.882 {400} | 0.882 {400} |
Maximum throughput lbs/hr {kg/hr}* | 97 {44} | 111 {50} | 132 {60} |
Bin capacity - standard bins ft3 {liter} | 0.4 {5.7} | 0.4 {5.7} | 0.4 {5.7} |
Maximum number of materials | 4 | 4 | 4 |
Number of standard dispensing valves | 2 | 3 | 4 |
Number of micro dispensing valves | 2 | 1 | 0 |
Control software (# of components) | 4 or 12 | 4 or 12 | 4 or 12 |
Dimensions inches {mm} |
|
|
|
A - Height above mounting plate | 27.25 {693} | 27.25 {693} | 27.25 {693} |
B - Width | 21.75 {552.4} | 21.75 {552.4} | 21.75 {552.4} |
C - Depth | 21.75 {552.4} | 21.75 {552.4} | 21.75 {552.4} |
D - Controller height | 11.25 {285.75} | 11.25 {285.75} | 11.25 {285.75} |
E - Controller width | 12.25 {311.15} | 12.25 {311.15} | 12.25 {311.15} |
F - Controller depth | 8.19 {208.03} | 8.19 {208.03} | 8.19 {208.03} |
Weight lbs {kg} |
|
|
|
Installed | 60 {27} | 60 {27} | 60 {27} |
Shipping | 80 {36.3} | 80 {36.3} | 80 {36.3} |
Voltage Running load amps |
|
|
|
120V/1 phase 50/60 hz | 1.0 | 1.0 | 1.0 |
220V/1 phase 50/60 hz | 0.5 | 0.5 | 0.5 |
Compressed air requirements |
|
|
|
| 40 psi @ 1 ft3/min { bars @ 0.47 liters/sec} | ||
|
| 1/4 in. NPT fitting |
|
Material filling options |
|
|
|
| ML8 |
| |
Central vacuum receiver |
| DL8 |
|
| flat lid |
| |
|
|
|
|
MOUNTING INTERFACE
SPECIFICATION NOTES:
*Maximum throughput rates are based on using all dispense valves dispensing no more than 1.0% colorant or additive per each micropulsing valve. Refer to the selection guide for more specific throughput informa- tion.
APPLICATION NOTE:
Handfill unless otherwise specified.
If you will be using this blender for central blending applications, it will be necessary to use a flow control valve with an air solenoid.
One Conair Drive ● Pittsburgh, PA 15202 ●
APPENDIX B