SPECIFICATIONS
TPBS012/1199
GRAVIMETRIC BATCH BLENDERS AutoWeigh GB240 and GB440 Models
TOP VIEW
| B |
4 | 3 |
C |
|
A | B |
1 | 2 |
MOUNTING | 14 in. |
INTERFACE | |
IB04 | {355.6 mm} |
| |
8 in. {203.2 mm} | 10 in. |
square bolt pattern | {254 mm |
(4) 9/16 in. | 3 in. {76.2 mm} |
{14.3 mm} | diameter |
diameter | through hole |
bolt holes |
|
|
|
|
|
|
|
|
| C |
B |
|
|
|
|
|
|
| |
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
A
FRONT VIEW | SIDE VIEW | CONTROL |
MODELS |
| GB240 | GB241 | GB242 | GB440 |
| GB441 | GB442 |
Performance characteristics |
|
|
|
|
|
|
|
|
Batch size lbs {g} |
| 4.4 {2000} | 4.4 {2000} | 4.4 {2000} | 8.8 {4000} |
| 8.8 {4000} | 8.8 {4000} |
Maximum throughput lbs/hr {kg/hr}* | 993 {451} | 678 {308} | 518 {235} | 1645 {748} |
| 983 {446} | 704 {319} | |
Bin capacity - main ingredient | ft3 {liter} | 3.5 {99.12} | 3.5 {99.12} | 3.5 {99.12} | 3.5 {99.12} |
| 3.5 {99.12} | 3.5 {99.12} |
Bin capacity - minor ingredient | ft3 {liter} | NA | 0.5 {14.16} | 0.5 {14.16} | NA |
| 0.5 {14.16} | 0.5 {14.16} |
Maximum number of materials |
| 4 | 5 | 6 | 4 |
| 5 | 6 |
Number of discharge valves |
| 4 | 4 | 4 | 4 |
| 4 | 4 |
Number of additive feeders |
| 0 | 1 | 2 | 0 |
| 1 | 2 |
Control software (# of components) | 4 or 12 | 12 | 12 | 4 or 12 |
| 12 | 12 | |
Dimensions inches {mm} |
|
|
|
|
|
|
|
|
A - Height above mounting plate† | 59.75 {1517.5} | 59.75 {1517.5} | 59.75 {1517.5} | 65.75 {1669.9} |
| 65.75 {1669.9} | 65.75 {1669.9} | |
B - Width ‡ |
| 34 {863.6} | 34 {863.6} | 34 {863.6} | 34 {863.6} |
| 34 {863.6} | 34 {863.6} |
C - Depth‡ |
| 34 {863.6} | 34 {863.6} | 34 {863.6} | 34 {863.6} |
| 34 {863.6} | 34 {863.6} |
D - Controller height |
| 11.25 {285.75} | 11.25 {285.75} | 11.25 {285.75} | 11.25 {285.75} |
| 11.25 {285.75} | 11.25 {285.75} |
E - Controller width |
| 12.25 {311.15} | 12.25 {311.15} | 12.25 {311.15} | 12.25 {311.15} |
| 12.25 {311.15} | 12.25 {311.15} |
F - Controller depth |
| 8.19 {208.03} | 8.19 {208.03} | 8.19 {208.03} | 8.19 {208.03} |
| 8.19 {208.03} | 8.19 {208.03} |
Weight lbs {kg} |
|
|
|
|
|
|
|
|
Installed |
| 230 {104} | 270 {122} | 310 {140} | 255 {116} |
| 295 {134} | 335 {152} |
Shipping |
| 335 {152} | 375 {170} | 415 {188} | 360 {163} |
| 400 {181} | 440{200} |
Voltage Total amps |
|
|
|
|
|
|
|
|
120V/1 |
| 4.8 | 5.8 | 6.8 | 4.8 |
| 5.8 | 6.8 |
240V/1 |
| 2.5 | 3.0 | 3.5 | 2.5 |
| 3.0 | 3.5 |
Compressed air requirements |
|
|
|
|
|
|
|
|
Discharge valves |
| 80 psi @ 0.2 ft3/min. {5.5bars @ 0.09 liters/sec}, 1/4 in. NPT fitting |
|
| ||||
Compressed air feeder |
| 40 psi @ 2 ft3/min. {2.8bars @ 0.94 liters/sec}, 1/4 in. NPT fitting |
|
| ||||
|
|
|
|
|
|
|
|
|
SPECIFICATION NOTES:
Each bin compartment can support a
*Throughput rates are based on using no more than 2% additive or colorant material total in either the CAF3 compressed air or F03 auger feeder. Always refer to the selection guide for specific throughput information.
†The optional flow control valve adds 6.5 in. {165 mm} to the total height. We recommend using the flow control valve when mounting the blender to a stand, surge bin or hopper.
‡ Feeders will increase width and depth dimensions. Please refer to feeder specifications.
One Conair Drive ● Pittsburgh, PA 15202 ●
APPENDIX B