Adjusting The Harness
The Shindaiwa blower features an advanced harness system that helps ensure maximum operator comfort and ease of operation.
■The shoulder harness is filled with soft padding for reduced operator fatigue.
■The simplified adjustment system makes it easy to match the harness to every body size and type.
BB
Comfortable
back pads
A
A
To tighten straps…
buckle
Pull strap loops down.
To loosen straps…
Pull the
Pull on the loops to quickly tighten the harness straps.
Quick- disconnect
spring hook
A = Adjust height
B = Adjust angle
Figure 20
…and pull the straps down.
Using The Blower
Operating Tips
In the hands of an experienced operator, the blower can efficiently move a wide variety of debris ranging from grass clip pings to gravel. As a general rule, operate your blower at the lowest throttle setting required to get the job done:
■Use low throttle settings when clear ing lightweight materials from around lawns or shrubbery.
■Use medium to higher throttle settings to move grass or leaves from parking lots or walkways.
■Use full throttle when moving heavy loads such as dirt or snow.
IMPORTANT!
Blower noise increases at higher throttle settings! Always use the lowest throttle set ting required to get the job done!
Heat sensor
This engine is equipped with a heat sensor in order to prevent overheating. If engine overheating occurs, the engine speed will be reduced to 5,000
■Stop the engine.
■Remove any leaves and debris blocking intake cover.
■Keep the engine speed at idle for 1 minute
12