Decal Installation
Tank Oil Level Sight Gauge:
1.Oil Level Sight Gauge is mounted on the side of the tank facing the rear of the tractor. The Tank may have to have the Paint touched up, or repainted completly. Use caution not to paint over this or damage it. (See Figure 31 & 32)
Tank Decal Installation:
1.Install Decals on Hydrailic Tank and CWT Cover. There are 10 decals that need to be installed on the Hydraulic Tank and CWT Cover (See Figure 32, 33, 34). Counter Weight must be Installed befor Boom is mounted to King Post.
2.Decal Part Number. (See Figure 32, 33, 34)
1 = # 02966305, Attention - Universal Tractor Hydraulic Oil 2 = # 02958241, Operators Safety Decal
3 = # 02977417, Operators Manual Inside
4 = # 1458392, Red Reflector
5= # 1458392, Yellow Reflector (mount in front of CWT Cover)
6= # 00756059, Warning - Oil Leak
7= # 02957827, Danger - Multi Hazard (Rotary) or
#002369, Danger - Multi Hazard (Flail)
8= # 02965262, Warning - Hose Burst
9= # 002508, Alamo Industrial Logo - Small (on front upper Tank)
10 = # 00769394, Alamo Industrial Logo - Large
Most Decals should already be installed when Tank Asembly is shipped.
Oil Level
Sight Gauge
Figure 31
Top of Tank | 1 |
2
3
Figure 32
4 7 6
Oil Level
Sight Gauge
108
Figure 33
5
9
Figure 34
© 2003 Alamo Group Inc. | Section 6 - 3 |