Alamo DSEB-D16/SAS instruction manual Frame Square Head Attachment

Optional Mower Head Installation

X-Frame Square Head

Attachment:

1.With a forklift or hoist, lower the Boom Weldment down on the X-Frame Square Head. Align the Boom Weldment with the X-Frame Square Head Hitch Post. Insert special bolts 1" x 9" (item 1) and item 2, 3/4" x 5-1/2" into Boom Weldment and Hitch Post. Attach nuts 1" (item 3) and item 4, 3/4" to bolt and tighten securely. Note: Additional support may be needed at the end of the Boom to aid in installation. Fig- ure 7.

2.Connect the Pivot Hitch toMower as shown in Parts and Assembvly Manuals. (See Figure 8)

3.Connect Hoses to Mower Head. Connect Hoses as shown (See Figure 8 & 9) Boom to Mowers , Do Not Start tractor untill the hydraulic Tank has been filled, Go to Hydraulic Tank Fill Section now. After Oil has been fill Start Tractor and run the Hy- draulic System through its funtions as out- lined in the Oil Fill Section. NEVER Start Tractor without Oil in system (Oil level to Sight Glass) it will damage the Hydraulic System if you do.

FIGURE 30

1,3

2,4

Figure 7

Figure 8

Figure 8

Figure 9

A-Boom (JD6615 / 7615 Asy Instruction Manual) 07/03

© 2003 Alamo Group Inc. Section 10 - 6