3Com 3C996B-T manual Removing Drivers from Autoexec.ncf

Removing Drivers from Autoexec.ncf

#WARNING!

#If you change the name of this server, you must update

#all the licenses that are assigned to this server. Using

#NWAdmin, double-click a license object and click

#Certificate Assignments. If the old name of

#this server appears, you must delete it and then add the

#new server name. Do this for all license objects. ServerID 1C8EE2C

LOAD ODINEB.NLM LOAD TCPIP

LOAD B57 SLOT=2 FRAME=Ethernet_802.2 NAME=B57_1_E82 BIND IPX B57_1_E82 NET=FAFD3D25

LOAD B57 SLOT=2 FRAME=Ethernet_802.3 NAME=B57_1_E83 BIND IPX B57_1_E83 NET=5A2D8D6D

LOAD B57 SLOT=2 FRAME=Ethernet_SNAP NAME=B57_1_ESP BIND IPX B57_1_ESP NET=477A35BD

LOAD B57 SLOT=2 FRAME=Ethernet_II NAME=B57_1_EII BIND IPX B57_1_EII NET=C3C8F2E4

BIND IP B57_1_EII ADDR=172.16.1.1 MASK=ff.ff.ff.0

mount all

SEARCH ADD SYS:\JAVA\BIN

SEARCH ADD SYS:\JAVA\NWGFX

NOTE: If you modify any NIC parameters, you must reboot the system before the changes will take effect. If you make changes and do not reboot, you may experience configuration problems. If the driver was loaded at console, however, no reboot

is necessary.

Removing Drivers from Autoexec.ncf

To remove the drivers from the autoexec.ncf file, locate the Load and Bind command lines associated with the Broadcom driver and remark them out by inserting the # symbol at the beginning of each command line.

Example:
#	LOAD	B57 SLOT=2 FRAME=Ethernet_802.2 NAME=B57_1_E82
#	BIND	IPX B57_1_E82 NET=FAFD3D25

#LOAD B57 SLOT=2 FRAME=Ethernet_802.3 NAME=B57_1_E83

#BIND IPX B57_1_E83 NET=5A2D8D6D

#LOAD B57 SLOT=2 FRAME=Ethernet_SNAP NAME=B57_1_ESP

#BIND IPX B57_1_ESP NET=477A35BD

#LOAD B57 SLOT=2 FRAME=Ethernet_II NAME=B57_1_EII

#BIND IPX B57_1_EII NET=C3C8F2E4

#BIND IP B57_1_EII ADDR=172.16.1.1 MASK=ff.ff.ff.0

55