SCO OpenServer Release 5 Driver
Driver Installation
To install the driver:
1Install the SCO OpenServer driver from the media image or installation diskette using either:
custom or scoadmin.
2Add the new network adapter using: netconfig.
3Modify the hardware configuration in Advanced Options to change the Line Speed and Flow Control, if desired. The settings for these parameters are listed in step 3 of “Driver Installation” on page 75.
NOTE: A kernel relink and reboot is required before the new configuration will take effect.
Jumbo Frames and Other Advanced Parameters
Jumbo MTU sizes and other advanced tunable parameters for the BCM5700 controller are located in the file space.c in the directory /etc/conf/pack.d/bcme. A description for each parameter is contained in space.c. Modify the desired parameter in space.c, rebuild the kernel, and reboot the system. Note that the MTU sizes can be individually set for each adapter in the system, whereas all other parameters apply globally to all adapters.
77
