3Com 3C996B-T manual Bind IP BASP1EII ADDR=172.16.210.1 MASK=255.255.0.0

6Novell NetWare Driver Setup

NOTE: Bind B57_1_EII to BASP_1_E82 is also bound to BASP_1_E82. VLSOT range is from 1 to 4 (only four TEAMS can be configured.)

Example of VLAN with Advanced Server Features:

LOAD BASP.LAN FRAME=ETHERNET_II NAME=BASP_1_V100_EII VSLOT=1 VLAN=100

LOAD BASP.LAN FRAME=ETHERNET_II NAME=BASP_1_V100_EII VSLOT=1 VLAN=200

LOAD BASP.LAN FRAME=ETHERNET_II NAME=BASP_1_V100_EII VSLOT=1 VLAN=300

LOAD B57.LAN FRAME=ETHERNET_II NAME=B57_1_EII SLOT=1 LOAD B57.LAN FRAME=ETHERNET_II NAME=B57_1_EII SLOT=2

BASP BIND BASP_1_V100_EII B57_1_EII

BASP BIND BASP_1_V100_EII B57_1_EII

BIND IP BASP_1_V100_EII ADDR=172.16.210.1 MASK=255.255.0.0 BIND IP BASP_1_V200_EII ADDR=172.17.220.1 MASK=255.255.0.0 BIND IP BASP_1_V200_EII ADDR=172.18.230.1 MASK=255.255.0.0

NOTE: Bind B57_1_V100_EII, B57_1_EII are also bound to the other VLANs on the same VSLOT. VLAN refer to VLAN ID and valid VLAN ID ranges from 1 to 4096.

Example of TRUNKING with BASP:

LOAD BASP.LAN FRAME=ETHERNET_II NAME=BASP_1_EII VSLOT=1 MODE=TRUNK

LOAD B57.LAN FRAME=ETHERNET_II NAME=B57_1_EII SLOT=1 LOAD B57.LAN FRAME=ETHERNET_II NAME=B57_1_EII SLOT=2

BASP BIND BASP_1_EII B57_1_EII

BASP BIND BASP_1_EII B57_2_EII

BIND IP BASP_1_EII ADDR=172.16.210.1 MASK=255.255.0.0

NOTE: Switch ports must configure for Trunking (FEC or GEC-Cisco only).

Example of GVRP with BASP:

LOAD BASP.LAN FRAME=ETHERNET_II NAME=BASP_1_EII VSLOT=1 MODE=GVRP

LOAD B57.LAN FRAME=ETHERNET_II NAME=B57_1_EII SLOT=1 LOAD B57.LAN FRAME=ETHERNET_II NAME=B57_1_EII SLOT=2

BASP BIND BASP_1_EII B57_1_EII

BASP BIND BASP_1_EII B57_2_EII

BIND IP BASP_1_EII ADDR=172.16.210.1 MASK=255.255.0.0

NOTE: Switch ports must configure for GVRP.

62