Measurement Functions | 3M™ Dynatel™ Advanced Modular System 965AMS |
DSL>DSL Loss>Operation
1.Press the blue DSL 
key to enter the DSL function.
Use the up and down arrow keys to select DSL Loss.
Use a tone source at the
far end that is capable of sending a known output level such as a 965AMS tester. Use 0dBm as the output level or follow your method of test.
2. Press DSL Setup to select the type of service.
3. Use the up and down arrow keys to select the type of service that you are measuring.
4. Press OK when finished.
100
