
Measurement Functions | 3M™ Dynatel™ Advanced Modular System 965AMS |
TDR>Dual Trace Mode>Operation
3. The pair under test (red/ black) is displayed at the top of the screen. The reference pair (yellow/blue) is displayed at the bottom of the screen.
4. Any changes in the control parameters affect both traces. It is not possible to control each trace independently.
TDR>Differential
Use the Differential mode to display only the differences between two pairs, usually a ‘good’ pair and a pair under test.
TDR>Differential>Hook-Up
RED Ring (B) 1
BLK | Tip (A) 1 |
YEL | Ring (B) 2 |
BLU | Tip (A) 2 |
1.Connect the red and black test leads to the pair under test.
2.Connect the blue and yellow test leads to a known good pair in the same cable. This is called the reference pair.
124