Measurement Functions

3M™ Dynatel™ Advanced Modular System 965AMS

RFL>Wet Pulp>Operation

4. The Wet Pulp test first makes a measurement with the far-end open.

Press Start to start the test.

5.Strap the pair at the far end, then press Continue .

Note: The “Opens Ratio” value displayed on the screen is the ratio of R1/(R2+R1) times

100.This value is used by some companies as part of the

measurement. It is not needed to calculate the distance to the fault.

6. The test results are shown in ohms.

Press Dist. to convert the ohms to the distance to the fault.

96

Page 96
Image 96
3M 965AMS manual RFLWet PulpOperation