3M 965AMS manual Pots, POTS Loss Hook-Up

3M™ Dynatel™ Advanced Modular System 965AMS Measurement Functions

POTS

Tests available with the POTS key include Loss, Noise, Longitudinal Balance, Load Coil Counter, Caller ID, Ringers, Level Trace, Kick Test and Voice Band Spectrum Analyzer.

POTS>Loss

Use Loss to measure the loss from the far-end of a circuit to the near-end using a precision tone between 200 Hz and 20kHz.

Note: You must use a device at the far end to generate the tone. This could be the milliwatt number in the central office or a 965AMS set to the tone mode.

POTS>Loss>Hook-Up

RED	Ring (B)
GRN	Ground (Earth)
BLK	Tip (A)

137